A lane is a narrow, designated portion of a road or street, meant for a single line of vehicles to travel. It is usually marked with road markings or barriers to separate it from other lanes or areas of the road. Lanes can vary in number, depending on the size of the road, and are designed to help organize traffic flow and improve safety. In some cases, lanes may be dedicated to specific types of vehicles, like buses or bicycles.

What is a "lane"?

lane

https://tts.langeek.co/read?text=bGFuZQ&hash=d596de896e792c92c079e7481fa6f888b93b98ef&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=bGFuZQ&hash=d1eae56e41a630dd4d05627e1db78f8336a7a36d&lang=en&cache-only=0&driver=googletts&accent=GB

A slow lane is a lane on a road or highway where vehicles that are traveling at lower speeds are expected to drive. It is typically located on the right side of a multi-lane road or highway. The slow lane is used by vehicles that are either moving at a reduced speed for safety reasons or are entering and exiting the roadway. Faster-moving vehicles are generally expected to pass in the left lanes.

What is a "slow lane"?

slow lane

https://tts.langeek.co/read?text=c2xvdyBsYW5l&hash=a925700b59ef5ba975199c647a0596871425b3e7&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=c2xvdyBsYW5l&hash=985710e893f5093a393d79a0afd65151521e3ccc&lang=en&cache-only=0&driver=googletts&accent=GB

A fast lane is a lane on a road or highway designated for vehicles traveling at higher speeds. It is usually located on the left side of a multi-lane road or highway. The fast lane is typically used by vehicles that are moving quickly and may pass slower-moving vehicles in the right lanes. Drivers are expected to move out of the fast lane when they are not actively passing other vehicles.

What is a "fast lane"?

fast lane

https://tts.langeek.co/read?text=ZmFzdCBsYW5l&hash=c72348a9bcaea816063419136fad919ed837cbf2&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=ZmFzdCBsYW5l&hash=d7863ebe88b383455ab439668da0f9e360d221eb&lang=en&cache-only=0&driver=googletts&accent=GB

A passing lane is a lane on a road or highway where drivers are allowed to overtake or pass slower vehicles. It is usually found on the left side of a multi-lane road, although in some countries, it can be on the right. The passing lane is intended for vehicles that need to go faster and is used to safely move around vehicles traveling at lower speeds. After passing, drivers are expected to return to a slower lane to allow others to pass as needed.

What is a "passing lane"?

passing lane

https://tts.langeek.co/read?text=cGFzc2luZyBsYW5l&hash=e3b853f5642c917dbaea9abc870f74d785c275a4&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=cGFzc2luZyBsYW5l&hash=5e68ca9be42be28462d3048022be560beb815f4d&lang=en&cache-only=0&driver=googletts&accent=GB

A high-occupancy vehicle lane (HOV lane) is a special lane on a road or highway designated for vehicles with a certain number of passengers, typically two or more. The purpose of an HOV lane is to encourage carpooling and reduce traffic congestion. These lanes are often marked with signs and are usually found on busy highways or roads where traffic flow is heavy. Vehicles that do not meet the passenger requirement are generally not allowed to use the HOV lane, except under certain conditions, such as during off-peak hours or if the vehicle has a special permit.

What is a "high-occupancy vehicle lane"?

HOV lane

https://tts.langeek.co/read?text=SE9WIGxhbmU&hash=f4ffe904c072f48bb67dcb01b986e9d1fb085385&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=SE9WIGxhbmU&hash=7b1191bef092a6b228b0bec2074090da23c43404&lang=en&cache-only=0&driver=googletts&accent=GB

A high-occupancy toll (HOT) lane is a type of lane on a road or highway where vehicles with multiple passengers can travel for free or at a reduced rate, while single-occupancy vehicles must pay a toll to use the lane. The toll price often changes depending on traffic conditions, allowing for faster travel when traffic is heavy. HOT lanes are designed to reduce congestion by encouraging carpooling and providing an option for drivers who are willing to pay for a quicker route. These lanes are usually marked and are often found in areas with heavy traffic.

What is a "high-occupancy toll lane"?

HOT lane

https://tts.langeek.co/read?text=SE9UIGxhbmU&hash=246bf52e726e3c7eb263d42953d6c21c7d2ff8ec&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=SE9UIGxhbmU&hash=775e7a97a3bb164f42e7d6f69ffef8f4466f5d31&lang=en&cache-only=0&driver=googletts&accent=GB

A reversible lane is a lane on a road or highway where the direction of traffic can change depending on the time of day or traffic flow. This type of lane is used to help manage traffic by allowing more lanes to be open in the direction with the highest volume of vehicles. For example, during rush hour, a lane might switch to flow toward a busy area in the morning and switch back later to help ease traffic in the opposite direction. Signs and lights are used to indicate when a lane is open or closed to traffic.

What is a "reversible lane"?

reversible lane

https://tts.langeek.co/read?text=cmV2ZXJzaWJsZSBsYW5l&hash=0214691e639052ac8e8c820d81b1c2b217fa90e5&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=cmV2ZXJzaWJsZSBsYW5l&hash=c11c4e10dbc4a961cab390beb868769b9833a470&lang=en&cache-only=0&driver=googletts&accent=GB

A climbing lane is a lane on a road or highway designed to help slower vehicles, such as trucks, move uphill more easily. This lane is typically added on steep roads or inclines where vehicles may struggle to maintain speed. It provides extra space for slower-moving traffic to allow faster vehicles to pass without causing delays or congestion. The climbing lane helps improve safety and traffic flow, especially on roads with significant elevation changes.

What is a "climbing lane"?

climbing lane

https://tts.langeek.co/read?text=Y2xpbWJpbmcgbGFuZQ&hash=85f5f4909bdba0de998e606c71fbb1389de81572&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=Y2xpbWJpbmcgbGFuZQ&hash=b0b969898cc77e4b31281ac7bda36a2f27b873cd&lang=en&cache-only=0&driver=googletts&accent=GB

A bicycle lane is a designated part of the road specifically for bicycles, separated from motor vehicle traffic to ensure the safety of cyclists. It is usually marked with painted lines or symbols to indicate the space where bicycles should travel. Bicycle lanes are commonly found on busy streets, highways, or urban areas where cycling is popular, providing a safer and more organized way for cyclists to navigate without interference from vehicles. The goal of bicycle lanes is to encourage cycling while improving safety for both cyclists and drivers.

What is a "bicycle lane"?

bicycle lane

https://tts.langeek.co/read?text=YmljeWNsZSBsYW5l&hash=183bb5c86b82e3906785fd858836b483d5c693d6&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=YmljeWNsZSBsYW5l&hash=b301e94fa6f0533cc1465a45a6924d2f052d8c9f&lang=en&cache-only=0&driver=googletts&accent=GB

A dogleg is a term used to describe a road or path that bends sharply or has a sharp turn, often resembling the shape of a dog's leg. It is commonly found in areas where a road changes direction suddenly, forcing vehicles to make a quick turn, typically to the left or right. Doglegs are often seen in urban street layouts, rural roads, or areas with obstacles that require a shift in direction. Drivers need to approach doglegs cautiously to navigate the sharp turn safely.

What is a "dogleg"?

dogleg

https://tts.langeek.co/read?text=ZG9nbGVn&hash=d0655f312b66087e98173583c7b3d56fcfedac8c&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=ZG9nbGVn&hash=a5cdfce4d8c0f19d517bf55c9c3a7ad36d8532a9&lang=en&cache-only=0&driver=googletts&accent=GB

A bike lane is a designated part of the road specifically for bicycles. It is usually marked by painted lines or signs, making it safer for cyclists to travel alongside motor vehicles. Bike lanes can be on the side of the road or sometimes separated from traffic for added protection. They help to reduce the risk of accidents by keeping cyclists in a designated space, separate from car lanes. These lanes are found in many cities and areas with a focus on promoting cycling as a mode of transportation.

What is a "bike lane"?

bike lane

https://tts.langeek.co/read?text=YmlrZSBsYW5l&hash=65bc5fe32b2e10469558ecf0f66253dd0db7d78e&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=YmlrZSBsYW5l&hash=b88d14bca262aa50f4d04381c9e41276f8bd1d8a&lang=en&cache-only=0&driver=googletts&accent=GB

A breakdown lane is a part of the road reserved for vehicles that are experiencing mechanical problems or emergencies. It is typically located on the side of the main travel lanes and allows drivers to pull over safely to avoid blocking traffic. Breakdown lanes are especially important on highways and high-speed roads, offering a safe space for drivers to stop until they can address the issue with their vehicle or call for assistance. These lanes help keep traffic flowing smoothly and reduce the risk of accidents.

What is a "breakdown lane"?

breakdown lane

https://tts.langeek.co/read?text=YnJlYWtkb3duIGxhbmU&hash=06427163348216783d0e7205582dfb82e71c48b5&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=YnJlYWtkb3duIGxhbmU&hash=8fb617ba692e3bfe9ec6395f675b2944607817fd&lang=en&cache-only=0&driver=googletts&accent=GB

An express lane is a part of a highway or road that is designed for faster-moving traffic. It is often reserved for vehicles with multiple passengers or those willing to pay a toll for quicker access. The purpose of the express lane is to reduce congestion on the main lanes by allowing certain vehicles to bypass slower traffic. These lanes may also be used for specific types of vehicles, like buses or high-occupancy vehicles, to help improve traffic flow.

What is an "express lane"?

express lane

https://tts.langeek.co/read?text=ZXhwcmVzcyBsYW5l&hash=19f9e920351e03fa247a6ecdf6bb1df034db3bd6&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=ZXhwcmVzcyBsYW5l&hash=798f7c39c6b9c9ca2391873e05824eccfcf4b570&lang=en&cache-only=0&driver=googletts&accent=GB

A carpool lane is a lane on a highway or road that is designated for vehicles with multiple passengers. The goal is to encourage people to share rides, reduce the number of vehicles on the road, and lower traffic congestion. These lanes are often marked with signs indicating the required number of passengers, such as two or more. In some cases, carpool lanes may be open to all vehicles during off-peak hours or when traffic conditions allow.

What is a "carpool lane"?

carpool lane

https://tts.langeek.co/read?text=Y2FycG9vbCBsYW5l&hash=154096015e945d290efb4aabb891b2f65f4d73cb&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=Y2FycG9vbCBsYW5l&hash=372c0851c542b18c675ebe7cbf6fb0c7b1a30489&lang=en&cache-only=0&driver=googletts&accent=GB

A curb is the raised edge along a road, typically made of concrete or stone, that separates the street from the sidewalk. It helps to control the flow of traffic, provides a clear boundary between the road and pedestrian areas, and also directs rainwater into drainage systems. Curbs are often seen in urban areas, where they assist with parking and traffic management by preventing vehicles from driving onto sidewalks.

What is a "curb"?

curb

https://tts.langeek.co/read?text=Y3VyYg&hash=8d7142583142726b561c311d5c879977c87aaf31&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=Y3VyYg&hash=b1df7155602ec1f455ecdcf333e6fade9d075ae5&lang=en&cache-only=0&driver=googletts&accent=GB

The curbside refers to the area or space along the edge of a road, right next to the curb. It is where vehicles often park, load, or unload. The term is commonly used when talking about services or activities that happen near the curb, such as curbside pickup, where goods or passengers are picked up directly from the curb without the need to enter a building or facility. Curbside areas help manage traffic flow and provide space for people and vehicles to interact safely along the street.

What is the "curbside"?

curbside

https://tts.langeek.co/read?text=Y3VyYnNpZGU&hash=d78fdafab4beb765c870b16596e970f99b0ba36f&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=Y3VyYnNpZGU&hash=e9958bf864bb9d6ff2df1aa33039e1078b518afa&lang=en&cache-only=0&driver=googletts&accent=GB

A camber refers to the slight curve or tilt of a road’s surface, which is designed to help water flow off the road instead of collecting on it. This helps prevent water from pooling and makes the road safer by reducing the risk of slippery conditions. The camber also contributes to the stability of the road by ensuring that the weight of vehicles is distributed evenly. It is typically most noticeable in the center of the road, where the curve is most pronounced, and gradually flattens toward the edges.

What is a "camber"?

camber

https://tts.langeek.co/read?text=Y2FtYmVy&hash=11a5d2560ea09e87caca06165c9f00ecfb717a13&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=Y2FtYmVy&hash=ea3f16847d2528ade016e6aac8e15f3769842e50&lang=en&cache-only=0&driver=googletts&accent=GB

A bend refers to a curve or change in direction along a road, path, or track. It occurs when the road or path turns to the left or right instead of continuing straight. Bends can vary in sharpness, from gentle curves to more severe turns. They are designed to navigate around obstacles or changes in the landscape, such as hills, rivers, or buildings. Drivers must slow down and carefully navigate bends to maintain control of their vehicle and avoid accidents.

What is a "bend"?

bend

https://tts.langeek.co/read?text=YmVuZA&hash=076ded9ef998daaf6ded5d9025902c58ecd8a823&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=YmVuZA&hash=99ee7f1b0677c095b9f214b1e74029685e97865e&lang=en&cache-only=0&driver=googletts&accent=GB

A switchback is a sharp bend in a road or trail that turns in the opposite direction, often seen on steep terrain or hills. It helps vehicles or pedestrians gradually ascend or descend by zigzagging back and forth, reducing the steepness of the slope. Switchbacks are commonly used in mountain roads or hiking paths, making it safer and easier to travel on difficult terrain by creating more manageable turns. These sharp turns allow vehicles or hikers to maintain control and prevent accidents.

What is a "switchback"?

switchback

https://tts.langeek.co/read?text=c3dpdGNoYmFjaw&hash=d0bb7c92fc92ea9a581ab032a3a7a1249388e1df&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=c3dpdGNoYmFjaw&hash=75b88eed787375909bc5a48b819abddf46f6cbb5&lang=en&cache-only=0&driver=googletts&accent=GB

A gradient refers to the degree of incline or slope of a road, path, or surface. It is the measure of how steep or gentle a slope is, often expressed as a percentage or ratio. A higher gradient indicates a steeper slope, while a lower gradient means a gentler incline. Gradients are important for understanding how challenging a road or path may be for travel, especially for vehicles, cyclists, or hikers. Steeper gradients can require more effort to ascend and can affect the control and safety of movement.

What is a "gradient"?

gradient

https://tts.langeek.co/read?text=Z3JhZGllbnQ&hash=aaa527b292eb970ef363236aaf5dfd1038b64c20&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=Z3JhZGllbnQ&hash=2765c3c2722974e78cb6c17aa237d312c219e811&lang=en&cache-only=0&driver=googletts&accent=GB

A hairpin turn is a sharp, U-shaped curve in a road or path, often with a very tight angle, resembling the shape of a hairpin. These turns are typically found on steep hills or mountainous roads and require drivers to reduce speed significantly to navigate them safely. Due to their sharpness, hairpin turns can be challenging to drive through, especially for large vehicles or when visibility is limited. They are designed to help the road wind around a difficult terrain while keeping the road within a manageable route.

What is a "hairpin turn"?

hairpin turn

https://tts.langeek.co/read?text=aGFpcnBpbiB0dXJu&hash=5c6a4e293985c1b6f15be545532dcaab83f9fab8&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=aGFpcnBpbiB0dXJu&hash=29a73b68bcf1092ef2fc435dafc3830ef72b8403&lang=en&cache-only=0&driver=googletts&accent=GB

winding

https://tts.langeek.co/read?text=d2luZGluZw&hash=4687b6e24c26c3635987f95e86b5d748c39dbb51&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=d2luZGluZw&hash=9ba082fb5233c9aa1e7a64a419c01c94880b84aa&lang=en&cache-only=0&driver=googletts&accent=GB

A circle refers to a roundabout or traffic circle, which is a circular intersection where multiple roads meet. Vehicles travel around a central island in a counterclockwise direction in countries where driving is on the right, or clockwise in countries with left-side driving. This design helps to keep traffic moving smoothly and reduce accidents by eliminating the need for sharp turns or stoplights. It is commonly used in areas with high traffic volume to manage flow and minimize delays.

What is a "circle"?

circle

https://tts.langeek.co/read?text=Y2lyY2xl&hash=b9c5673f36aa0febab0a4eaf21e5fca21d4a5a9e&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=Y2lyY2xl&hash=f709fb10a069e9ee0b4989099e40ea261a5e9328&lang=en&cache-only=0&driver=googletts&accent=GB

A loop around is a path or route that curves or bends in a way that brings people back to where they started, without needing to turn around. It often creates a circular or winding journey, allowing a return to the starting point. This kind of route is common in roads or paths designed for traffic flow or to offer scenic views. It typically involves following a roundabout way, where travelers can continue without needing to retrace their steps.

What is a "loop around"?

loop around

https://tts.langeek.co/read?text=bG9vcCBhcm91bmQ&hash=37ef57ed7617c47b4124e2aa6dcf0bf41f72bdbb&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=bG9vcCBhcm91bmQ&hash=070261f5bce710ab29ed0b2523e83b8dd9c4dc6d&lang=en&cache-only=0&driver=googletts&accent=GB

A merge is the point where two or more roads or lanes of traffic come together, and vehicles must combine into a single lane. This typically occurs at the end of an entrance ramp or when multiple lanes of traffic converge. Drivers need to adjust their speed and position to smoothly join the traffic flow without causing disruptions. It typically involves giving way to others to ensure a safe and efficient transition.

What is a "merge"?

merge

https://tts.langeek.co/read?text=bWVyZ2U&hash=a9883ad2dd0672847cff93d98042cbe04f3efc43&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=bWVyZ2U&hash=ace8703f7f91e596d7d93ed811999448ed43a90c&lang=en&cache-only=0&driver=googletts&accent=GB

A jughandle is a type of road design used to help vehicles make turns, particularly at intersections. Instead of turning left directly onto a main road, drivers take an additional right turn onto a ramp, which then loops around and allows them to turn left onto the desired road. This design helps improve traffic flow and safety by reducing the need for left turns across oncoming traffic. Jughandles are often used in areas with high traffic volumes or where traditional left-turn lanes are not possible.

What is a "jughandle"?

jughandle

https://tts.langeek.co/read?text=anVnaGFuZGxl&hash=d927811b84846aeb4ea7ce1c08b81e1c968d8981&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=anVnaGFuZGxl&hash=218968073475039629c661185dc98f62744e42aa&lang=en&cache-only=0&driver=googletts&accent=GB

The roadside refers to the area or space located alongside a road or highway. It includes the land or strip of land next to the road, which can vary in width and may contain features like grass, trees, fences, or barriers. This area is typically not part of the roadway but is often used for emergency stops, signs, and in some cases, utility installations. The roadside is an important part of road design, helping with safety, drainage, and maintenance.

What is the "roadside"?

roadside

https://tts.langeek.co/read?text=cm9hZHNpZGU&hash=4a1a9c95c388aa704ce03d4b375f10a0ca444a58&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=cm9hZHNpZGU&hash=8c18d9c6c81d9756f0f05f1a6cbf4c10cac5de74&lang=en&cache-only=0&driver=googletts&accent=GB

A median strip is the area of land that separates lanes of traffic moving in opposite directions on a road or highway. It is usually located in the middle of the road and can be made of grass, concrete, or other materials. The purpose of a median strip is to provide a safe space between opposing lanes of traffic, reducing the risk of head-on collisions and allowing for better traffic flow. In some cases, a median strip may also have barriers or trees to enhance safety.

What is a "median strip"?

median strip

https://tts.langeek.co/read?text=bWVkaWFuIHN0cmlw&hash=0ef92f9b36675babdb1d3139db89c6009eb05e81&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=bWVkaWFuIHN0cmlw&hash=336a9060951b76a2e4629441434c029892cf4672&lang=en&cache-only=0&driver=googletts&accent=GB

A verge is the strip of land located along the edge of a road or pathway. It is usually found between the roadway and a sidewalk, often planted with grass or small plants. The verge helps separate vehicles from pedestrians and can provide space for utilities, signs, or drainage. In some cases, it may also serve as a safety area, giving extra space between the road and nearby buildings or fences.

What is a "verge"?

verge

https://tts.langeek.co/read?text=dmVyZ2U&hash=ad2067ebeb92f8c86258974c14dc19f4d6597359&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=dmVyZ2U&hash=78984546ae54ca2ffc5943cb97621c3ca3aae519&lang=en&cache-only=0&driver=googletts&accent=GB

A shoulder is the area of land next to the roadway, usually on the outer edge. It is typically used for emergency stopping or as a safety zone for vehicles, such as when they need to pull over. The shoulder can also be used for pedestrian walkways or bike lanes in some areas. It provides extra space beside the main lanes of traffic, helping to avoid accidents or allowing vehicles to stop without blocking traffic.

What is a "shoulder"?

shoulder

https://tts.langeek.co/read?text=c2hvdWxkZXI&hash=0e3e5e2d7df061aac89a79b9c8a9d5a0de9b329b&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=c2hvdWxkZXI&hash=530633206fa241e58188b8f321f57a69014b9329&lang=en&cache-only=0&driver=googletts&accent=GB

A soft shoulder refers to a section of the road next to the main lanes that is usually not used for driving. It is typically made of gravel, dirt, or other soft materials and serves as a safety feature. Drivers are not expected to drive on the soft shoulder, but it provides a space for vehicles to pull over in emergencies or for stopping when needed. It is often slightly lower than the main road and can help prevent accidents by giving drivers a safe area to move out of the way of traffic.

What is a "soft shoulder"?

soft shoulder

https://tts.langeek.co/read?text=c29mdCBzaG91bGRlcg&hash=cd93d0b3af2c2d652edb17549368e1e9bafd3146&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=c29mdCBzaG91bGRlcg&hash=460d98f04345e66b78f068b62379847ce4d030a4&lang=en&cache-only=0&driver=googletts&accent=GB

A pylon is a tall, upright structure designed to support and hold electrical wires or cables above the ground. Made from materials such as steel or concrete, pylons are spaced at regular intervals to carry electricity over long distances. They are essential for connecting power stations to homes and businesses, helping to distribute electricity safely. Pylons can be found in both rural and urban areas, often standing out in the landscape due to their size and height. They are built to withstand weather conditions and to ensure that electrical lines remain stable and secure.

What is a "pylon"?

pylon

https://tts.langeek.co/read?text=cHlsb24&hash=067080cb2de36ad38bd209d5f2744dac3725e3bd&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=cHlsb24&hash=678c57e623eb2e1b9ddfc085269166aaea921939&lang=en&cache-only=0&driver=googletts&accent=GB

A gantry is a large framework that holds signs, traffic signals, cameras, or other equipment above the road. It is usually made of metal and is built to stand strong and support the weight of the items it holds. Gantries are commonly found on highways or busy roads where they are used to display road signs, monitor traffic, or collect tolls. These structures help ensure that important information is clearly visible to drivers while keeping equipment safely above the road.

What is a "gantry"?

gantry

https://tts.langeek.co/read?text=Z2FudHJ5&hash=4ae45bed6b647976facee316b6912dc5badf3b2f&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=Z2FudHJ5&hash=19f88787067d3dda3c82e3300a2ef063853944c8&lang=en&cache-only=0&driver=googletts&accent=GB

A billboard is a large outdoor advertising structure that displays advertisements, messages, or images to the public. It is typically positioned in places where many people can see it from a distance, such as near highways, busy streets, or in high-traffic areas. Billboards are usually made of a large, flat surface that can be printed with large graphics or text. They are used by companies or organizations to promote products, services, or events and are intended to capture the attention of people as they pass by.

What is a "billboard"?

billboard

https://tts.langeek.co/read?text=YmlsbGJvYXJk&hash=a6d193bf53004886597a30f640e0933b098a6b4d&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=YmlsbGJvYXJk&hash=817dd73e704790f299ae003b84a9a94bbf74717d&lang=en&cache-only=0&driver=googletts&accent=GB

A pinch point is an area that causes a restriction in movement, occurring when a space or passage narrows. This narrowing can slow down or limit the movement of people, vehicles, or goods. Pinch points are commonly found on roads, bridges, or walkways where the width decreases, making it difficult for things to pass through easily. These areas can create delays or congestion, especially when there is high traffic or demand. They are often temporary issues that can be resolved by widening the space or improving the flow.

What is a "pinch point"?

pinch point

https://tts.langeek.co/read?text=cGluY2ggcG9pbnQ&hash=1909f389c0f7c160970d7a4941b3117cd31980d4&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=cGluY2ggcG9pbnQ&hash=a25b7f9238119f876c334b65632bc8c0434fe1ed&lang=en&cache-only=0&driver=googletts&accent=GB

A turnaround is an area designed for vehicles to change direction. It provides enough space for drivers to safely reverse or make a U-turn, especially in places where there is limited room to maneuver. Turnarounds are often found in residential areas, parking lots, or dead-end streets, where they allow vehicles to turn without having to back up for long distances. These areas are typically clearly marked to help drivers identify where they can safely turn around.

What is a "turnaround"?

turnaround

https://tts.langeek.co/read?text=dHVybmFyb3VuZA&hash=a77f5f04ed82baed02b294ca2c2992cbcbc1678a&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=dHVybmFyb3VuZA&hash=0b0c131346940d46becfbd65364ef77ce1576461&lang=en&cache-only=0&driver=googletts&accent=GB

to branch off

https://tts.langeek.co/read?text=dG8gYnJhbmNoIG9mZg&hash=17f57d7f1b8e89ba5b530e63e9da262ae91ad164&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=dG8gYnJhbmNoIG9mZg&hash=f39e1fe7995bad854063c07987eadb77a16dc064&lang=en&cache-only=0&driver=googletts&accent=GB

to fork

https://tts.langeek.co/read?text=dG8gZm9yaw&hash=210aa5bf68766c89b178449a52ccfb1667a59c7f&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=dG8gZm9yaw&hash=1fc9f0f007379ff299c457e18c1c4250c1fbe558&lang=en&cache-only=0&driver=googletts&accent=GB

passable

https://tts.langeek.co/read?text=cGFzc2FibGU&hash=e202230f68b9a08f6afc0279baae34e583e72f5f&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=cGFzc2FibGU&hash=39bc9670f3619ff6ebd355efe799f8baca4d3d56&lang=en&cache-only=0&driver=googletts&accent=GB

impassable

https://tts.langeek.co/read?text=aW1wYXNzYWJsZQ&hash=d9958cd9bfd16636bb1b4ac5e84780afd0318b86&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=aW1wYXNzYWJsZQ&hash=9154836d00da5c7e80114135f0606c76bb23ced0&lang=en&cache-only=0&driver=googletts&accent=GB

An intersection is a point where two or more roads, streets, or paths meet or cross each other. It is a place where vehicles, pedestrians, or cyclists may need to stop or change direction to continue on their way. Intersections are often controlled by traffic signals, signs, or roundabouts to help manage the flow of traffic and ensure safety. They can vary in size and complexity, from simple crossroads to larger, multi-lane junctions, and are a key feature of transportation systems, allowing movement between different routes.

What is an "intersection"?

intersection

https://tts.langeek.co/read?text=aW50ZXJzZWN0aW9u&hash=f1331cb401178e0fd050a61d143d4541c4652aa0&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=aW50ZXJzZWN0aW9u&hash=20f7b8bfbb5ba1a4222aca79c4d6c2e0a9aaa9ff&lang=en&cache-only=0&driver=googletts&accent=GB

Wrong-way concurrency occurs when two or more numbered highways share the same roadway while being signed with opposing cardinal directions (e.g., one marked "North" and the other "South" along the same stretch). This inconsistency arises due to historical route numbering, jurisdictional compromises, or geographical constraints that prevent logical directional alignment. These anomalies are often remnants of older highway systems that were later integrated into modern networks without directional adjustments. Examples include segments where US highways and state or provincial routes intersect in urban areas or mountainous terrain.

What is "wrong-way concurrency"?

wrong-way concurrency

https://tts.langeek.co/read?text=d3Jvbmctd2F5IGNvbmN1cnJlbmN5&hash=58def5d8cfac5d73c1366399084fc8eb99888f83&lang=en&cache-only=0&driver=googletts

https://tts.langeek.co/read?text=d3Jvbmctd2F5IGNvbmN1cnJlbmN5&hash=708117e279f8f411f1619c763b8103c04a0b32d9&lang=en&cache-only=0&driver=googletts&accent=GB

Here you will learn some English words related to road design and features such as "lane", "curb", and "shoulder."

Road Design and Features

English Words for "Road Design and Features"

اصطلاحات انگلیسی برای «طراحی و ویژگی‌های جاده»