A divided highway is a road that has a physical barrier separating the lanes of traffic going in opposite directions. This design helps to prevent head-on collisions and keeps traffic moving in a safer, more organized manner. Divided highways are commonly used for high-speed routes, such as major roads, expressways, or freeways, and are typically wider than regular roads to accommodate more lanes of traffic. The separation between lanes helps improve traffic flow and reduces the risk of accidents.

What is a "divided highway"?

divided highway

https://tts.langeek.co/read?text=ZGl2aWRlZCBoaWdod2F5&hash=daecde4bb118a215b01d591b92433aca589e28f8&lang=en&cache-only=0&driver=googletts&accent=US

An undivided highway is a type of road that does not have any physical barrier separating the lanes of traffic going in opposite directions. On these roads, vehicles traveling in both directions share the same space, usually marked by lane lines or a centerline. Undivided highways are typically narrower than divided highways and are often found in less busy or rural areas. Because there is no barrier to prevent vehicles from crossing into oncoming traffic, drivers must be more cautious, especially when overtaking other vehicles.

What is an "undivided highway"?

undivided highway

https://tts.langeek.co/read?text=dW5kaXZpZGVkIGhpZ2h3YXk&hash=04fc407448a9a5cb6777b178fe60962f6a8544a4&lang=en&cache-only=0&driver=googletts&accent=US

An interstate highway is a major, high-speed road that is part of a national system of highways connecting different states. These highways are designed to allow long-distance travel with minimal interruptions, providing direct routes between cities and regions. Interstate highways typically have multiple lanes in each direction and are built to handle heavy traffic, including trucks and commercial vehicles. They often bypass local areas, avoiding city centers to speed up travel times. These roads are maintained by both national and state governments and are important for trade, transportation, and travel across the country.

What is an "interstate highway"?

interstate highway

https://tts.langeek.co/read?text=aW50ZXJzdGF0ZSBoaWdod2F5&hash=d835cc5a09729e5d21e10ab6a4a1e54740b8df82&lang=en&cache-only=0&driver=googletts&accent=US

A spur route is a short road or highway that branches off from a main road or highway to provide access to a specific location, such as a city, town, or other important destination. Spur routes are typically used to connect the main highway network with areas that are not directly on the main route. They are often shorter than regular highways and can be designed to handle less traffic, serving as a link to more local or less-accessible places.

What is a "spur route"?

spur route

https://tts.langeek.co/read?text=c3B1ciByb3V0ZQ&hash=dd4ee9b2be1515b2e1621d5629c3573857d7b960&lang=en&cache-only=0&driver=googletts&accent=US

A super two is a type of highway that has two lanes, one in each direction, but is designed to handle higher traffic volumes and speeds than a typical two-lane road. It often includes features like wide shoulders, limited access points, and the ability to pass slower vehicles safely. A super two is usually used in areas where a full four-lane highway is not needed but where traffic flow needs to be more efficient and safer than on a regular two-lane road. It is often considered a cost-effective solution to improve road capacity without fully expanding to a larger highway.

What is a "super two"?

super two

https://tts.langeek.co/read?text=c3VwZXIgdHdv&hash=35321548abdf679981ae63bd889840392541b3be&lang=en&cache-only=0&driver=googletts&accent=US

A smart highway is a type of road that uses advanced technology to improve traffic flow, safety, and the driving experience. These highways may have features like sensors, cameras, or digital signs that monitor traffic, control speed limits, or provide real-time information to drivers. Some smart highways even include features like lane management systems or electric charging stations for electric vehicles. The goal of a smart highway is to reduce traffic congestion, enhance safety, and make travel more efficient by using technology to respond to changing conditions on the road.

What is a "smart highway"?

smart highway

https://tts.langeek.co/read?text=c21hcnQgaGlnaHdheQ&hash=88cc2a0b70b2f49b5ef5b2bbbf310ecfc7309501&lang=en&cache-only=0&driver=googletts&accent=US

An elevated highway is a type of road or highway that is built above the ground, usually supported by pillars or columns. This design allows the road to pass over other roads, buildings, or areas, helping to avoid traffic congestion or obstacles on the ground level. Elevated highways are often used in busy urban areas where space is limited and there is a need to move large volumes of traffic efficiently. They can help reduce traffic jams, provide smoother travel, and make better use of limited land, though they can also be more expensive to build and maintain.

What is an "elevated highway"?

elevated highway

https://tts.langeek.co/read?text=ZWxldmF0ZWQgaGlnaHdheQ&hash=33666e900eb41a7c9849771a79d5bf171069ef6a&lang=en&cache-only=0&driver=googletts&accent=US

A controlled-access highway is a type of road that limits the points where vehicles can enter or exit, typically through ramps or designated interchanges. This design helps maintain a smooth flow of traffic by preventing frequent stops and turns from local roads. Controlled-access highways are often used for long-distance travel and are designed for higher speeds and heavier traffic, as they minimize interruptions and reduce the risk of accidents. They are common in urban and rural areas, especially for major roads, expressways, or freeways.

What is a "controlled-access highway"?

controlled-access highway

https://tts.langeek.co/read?text=Y29udHJvbGxlZC1hY2Nlc3MgaGlnaHdheQ&hash=92194e6c2093a5378b5c86e54d8aad991461f487&lang=en&cache-only=0&driver=googletts&accent=US

A local-express lane system is a type of road layout where lanes are divided into two categories: local lanes and express lanes. Local lanes are for vehicles that need to access exits or enter local roads, while express lanes are for vehicles traveling long distances without needing to exit. This system allows faster-moving traffic to stay in the express lanes, reducing congestion in the local lanes and helping traffic flow more smoothly. Local-express lane systems are commonly found on busy highways or urban roads to improve efficiency and reduce delays.

What is a "local-express lane system"?

local-express lane system

https://tts.langeek.co/read?text=bG9jYWwtZXhwcmVzcyBsYW5lIHN5c3RlbQ&hash=c09e05cc16b8dcd8b7667c563322a58bcca1dc4f&lang=en&cache-only=0&driver=googletts&accent=US

An on-ramp is a short road or entrance ramp that allows vehicles to merge onto a highway or freeway from a smaller road or street. It is designed to give drivers enough space to accelerate and safely enter the faster-moving traffic on the main road. On-ramps are typically located at intersections or exits and help connect local roads to larger highways, ensuring smooth traffic flow and easier access for drivers entering high-speed roads.

What is an "on-ramp"?

on-ramp

https://tts.langeek.co/read?text=b24tcmFtcA&hash=e0ede5893890ccbf179519e162c1b783ef8d9c6b&lang=en&cache-only=0&driver=googletts&accent=US

An off-ramp is a short road or exit ramp that allows vehicles to leave a highway or freeway and access a smaller road or street. It is designed to slow down vehicles as they move off the main highway and onto local roads. Off-ramps are typically located at interchanges or exits and help drivers safely exit high-speed roads to reach specific destinations, such as cities, towns, or businesses.

What is an "off-ramp"?

off-ramp

https://tts.langeek.co/read?text=b2ZmLXJhbXA&hash=5113ea0f22f854d27ea995e2fa721f712b4ed1da&lang=en&cache-only=0&driver=googletts&accent=US

A turn-off is a road or exit where vehicles can leave a main road or highway to go in a different direction. It is typically a smaller road or path that branches off from a larger road, allowing drivers to change their route. Turn-offs are often used to access specific destinations, such as side streets, businesses, or rural areas. They are designed to provide an easy and safe way for vehicles to leave the main flow of traffic.

What is a "turn-off"?

turn-off

https://tts.langeek.co/read?text=dHVybi1vZmY&hash=ea74c60499dd38aec742b5cbbea56fa4723c069c&lang=en&cache-only=0&driver=googletts&accent=US

A corner is the point where two roads or streets meet and change direction, forming an angle. It is the turning point where vehicles or pedestrians need to change direction to continue along their route. Corners are commonly found in urban areas and can be either sharp or gradual, depending on how the roads intersect. They can be important for navigation and are often marked with signs or signals to guide traffic and pedestrians safely around the bend.

What is a "corner"?

corner

https://tts.langeek.co/read?text=Y29ybmVy&hash=70423733c995f37b3b950ad4e78ad3a55a79beb8&lang=en&cache-only=0&driver=googletts&accent=US

A crossroad is a place where two or more roads meet, forming a junction. It is a point where vehicles and pedestrians can travel in different directions, depending on their destination. Crossroads can be found in both rural and urban areas, and they may be controlled by traffic signals or signs. These areas are important for directing traffic and allowing movement between various routes. Depending on the location and traffic flow, crossroads may vary in complexity, from simple four-way stops to larger, more complicated intersections.

What is a "crossroad"?

crossroad

https://tts.langeek.co/read?text=Y3Jvc3Nyb2Fk&hash=ee530d31be213253dcf19dfe9c85918e84a53d50&lang=en&cache-only=0&driver=googletts&accent=US

A fork is a point where a single route divides into two separate paths. It occurs when a road, trail, or path branches off, offering travelers a choice of direction to follow. Forks can be found in both natural settings, like hiking trails, or in roads where one must decide which way to go. These points are often marked with signs or other indicators to guide people in choosing the correct route.

What is a "fork"?

fork

https://tts.langeek.co/read?text=Zm9yaw&hash=e52295e32a9dcad79a8bc6224c8f4713e6044953&lang=en&cache-only=0&driver=googletts&accent=US

A rotary, also known as a traffic circle or roundabout, is a circular intersection where multiple roads meet. Vehicles travel around a central island in a counterclockwise direction, in countries where people drive on the right side of the road, to exit onto one of the connecting roads. This design helps manage traffic flow by reducing the need for stoplights or stop signs, allowing vehicles to keep moving smoothly. Rotaries are often used in busy areas to keep traffic moving and reduce the likelihood of accidents, as they help control speed and eliminate sharp turns.

What is a "rotary"?

rotary

https://tts.langeek.co/read?text=cm90YXJ5&hash=780fecd81583e29894e24d07458b021647ea8d12&lang=en&cache-only=0&driver=googletts&accent=US

A traffic circle is a circular intersection where several roads meet, and vehicles move around a central island in one direction to reach their desired exit. The design of a traffic circle helps improve traffic flow by reducing the need for stop signs or traffic signals, allowing cars to keep moving. Traffic circles are often used in busy areas or where roads intersect at sharp angles. They are meant to reduce the chance of accidents by controlling the speed of vehicles and providing a clear path for drivers to follow when navigating through the intersection.

What is a "traffic circle"?

traffic circle

https://tts.langeek.co/read?text=dHJhZmZpYyBjaXJjbGU&hash=cebe642e2b1d935ac06a187cbcf95efa5e205305&lang=en&cache-only=0&driver=googletts&accent=US

A roundabout is a circular intersection where traffic flows in one direction around a central island. Vehicles entering the roundabout yield to those already inside, allowing traffic to flow smoothly without the need for stop signs or traffic lights. Roundabouts are designed to improve safety and reduce congestion by lowering speeds and eliminating sharp turns. They are commonly used in places with high traffic volume or where multiple roads meet, as they help reduce the risk of accidents and keep traffic moving efficiently.

What is a "roundabout"?

roundabout

https://tts.langeek.co/read?text=cm91bmRhYm91dA&hash=6209e92378e06636c4d833ded5a0459ce523a4c1&lang=en&cache-only=0&driver=googletts&accent=US

A gore is a small, triangular piece of land or space typically found at the junction of two roads or highways, often at exits or entrances. It is the area between an on-ramp and a highway or between different lanes of traffic. Gores are designed to provide separation between vehicles merging or diverging, helping to ensure smooth transitions and reduce congestion or accidents. These areas are usually not meant for driving but are marked with signs or barriers to guide traffic.

What is a "gore"?

gore

https://tts.langeek.co/read?text=Z29yZQ&hash=dd0417076fbb8284eb2423e95e5dda20463ae0f0&lang=en&cache-only=0&driver=googletts&accent=US

A quadrant roadway intersection is a type of road junction where four roads meet, typically arranged in a way that forms four sections, around the intersection. This design allows for smoother traffic flow by reducing the need for sharp turns or complicated crossings. Often, quadrant intersections are designed to minimize congestion and improve safety by organizing traffic in a more predictable manner. These intersections are commonly found in both urban and suburban areas and can include features like traffic signals, or other traffic control measures to manage the flow of vehicles.

What is a "quadrant roadway intersection"?

quadrant roadway intersection

https://tts.langeek.co/read?text=cXVhZHJhbnQgcm9hZHdheSBpbnRlcnNlY3Rpb24&hash=e6eb36e363c634f5931bedb924622237de42b325&lang=en&cache-only=0&driver=googletts&accent=US

A seagull intersection is a type of road design where a main road is connected to another road or street through a series of curves and turns, creating a pattern that resembles a seagull's wings. This intersection design is used to redirect traffic in a way that allows vehicles to enter or exit a major road while maintaining traffic flow. The seagull intersection is often found in areas where space is limited or where direct access to the main road is not possible. It is designed to safely manage traffic movements, reducing the risk of accidents at junctions.

What is a "seagull intersection"?

seagull intersection

https://tts.langeek.co/read?text=c2VhZ3VsbCBpbnRlcnNlY3Rpb24&hash=4d21a51f4b11c58495525994dfec386595fd0fa7&lang=en&cache-only=0&driver=googletts&accent=US

A three-way intersection is a junction where three roads meet, forming a T or Y shape. In a T-intersection, one road ends while the other continues, requiring vehicles from the ending road to turn left or right. In a Y-intersection, roads merge or split at an angle, allowing traffic to flow in different directions. These intersections are controlled by stop signs, traffic lights, or right-of-way rules to help vehicles and pedestrians move safely. Three-way intersections are common in both urban and rural areas, connecting different roads while managing traffic flow efficiently.

What is a "three-way intersection"?

three-way intersection

https://tts.langeek.co/read?text=dGhyZWUtd2F5IGludGVyc2VjdGlvbg&hash=90e90dd2666092f5786f0aeb9be277d0b2f3cad3&lang=en&cache-only=0&driver=googletts&accent=US

A continuous-flow intersection is a type of road design that improves traffic movement by shifting left-turning vehicles to a separate lane before they reach the main intersection. This design allows left turns to take place without stopping the main traffic flow, reducing delays and congestion. Vehicles use designated lanes and signals to move efficiently, avoiding the need for traditional left-turn waiting areas. Continuous-flow intersections are often used in busy areas to improve safety and keep traffic moving smoothly by reducing frequent stopping and starting.

What is a "continuous-flow intersection"?

continuous-flow intersection

https://tts.langeek.co/read?text=Y29udGludW91cy1mbG93IGludGVyc2VjdGlvbg&hash=d00157d931fa0ae5e7d945bd2daaddfa7e649c9f&lang=en&cache-only=0&driver=googletts&accent=US

A T-intersection is a place where one road meets another but does not continue straight, forming a T shape. The road that ends must turn left or right onto the crossing road. These intersections are usually controlled by stop signs or traffic lights to help vehicles move safely. T-intersections are common in cities, neighborhoods, and rural areas, connecting different roads while managing traffic flow.

What is a "T-intersection"?

T-intersection

https://tts.langeek.co/read?text=VC1pbnRlcnNlY3Rpb24&hash=af32d2676e0f91b6f2acb41fdbba206844c7640b&lang=en&cache-only=0&driver=googletts&accent=US

A grade crossing is a place where a road and a railway track cross at the same level, without a bridge or tunnel separating them. Vehicles and pedestrians must stop or let the train pass when it is coming. These crossings often have warning signs, flashing lights, or gates to improve safety and prevent accidents. Grade crossings are commonly found in cities, towns, and rural areas where roads and train tracks meet.

What is a "grade crossing"?

grade crossing

https://tts.langeek.co/read?text=Z3JhZGUgY3Jvc3Npbmc&hash=c1caf0780f83679d0500cc60be71a253a67d8d4b&lang=en&cache-only=0&driver=googletts&accent=US

A railroad crossing is a place where a road and a railroad track meet at the same level. Drivers and pedestrians need to be careful and watch for trains when crossing. These crossings usually have warning signs, flashing lights, or gates to alert people when a train is coming. Railroad crossings are common in both urban and rural areas, and they help connect different parts of a town or region with the railway system.

What is a "railroad crossing"?

railroad crossing

https://tts.langeek.co/read?text=cmFpbHJvYWQgY3Jvc3Npbmc&hash=7993f65df682451f02af6e00acfc71789702daf7&lang=en&cache-only=0&driver=googletts&accent=US

A level junction is a place where two or more roads meet at the same level, without any overpasses or underpasses. Vehicles travel across the intersection on the same ground level, usually with traffic signals or signs to control movement. This type of junction is common in both cities and rural areas, allowing different roads to connect and direct traffic in various directions.

What is a "level junction"?

level junction

https://tts.langeek.co/read?text=bGV2ZWwganVuY3Rpb24&hash=5cf00a9df634e4c33f6c1be4cc7abe1bb51b185e&lang=en&cache-only=0&driver=googletts&accent=US

An interchange is a system of roads that allows vehicles to move between different highways or major roads without crossing traffic. It typically includes ramps, overpasses, or underpasses, helping drivers switch from one road to another safely and efficiently. Interchanges are often found in busy areas where multiple highways or roads meet, reducing traffic congestion and improving flow by allowing vehicles to enter and exit highways without stopping.

What is an "interchange"?

interchange

https://tts.langeek.co/read?text=aW50ZXJjaGFuZ2U&hash=e22cefee0102d790f47faac30edd7851bb3d1d1c&lang=en&cache-only=0&driver=googletts&accent=US

A diamond interchange is a type of road interchange where a highway crosses a smaller road, with ramps on each corner that allow vehicles to enter and exit the highway. The shape of the interchange resembles a diamond, with the smaller road running through the middle and the ramps connecting it to the highway. This design is commonly used in areas with moderate traffic flow, as it allows for easy and safe movement between roads without requiring stoplights or complicated turns.

What is a "diamond interchange"?

diamond interchange

https://tts.langeek.co/read?text=ZGlhbW9uZCBpbnRlcmNoYW5nZQ&hash=610d8861a69007d3cfe0615eff5c2aff615aeb12&lang=en&cache-only=0&driver=googletts&accent=US

A diverging diamond interchange is a type of road design used to improve traffic flow at intersections between highways and other major roads. In this setup, vehicles temporarily switch sides of the road as they cross over a bridge, allowing them to make left turns without having to wait for oncoming traffic. This unique layout helps reduce congestion and the number of accidents by allowing smoother, safer turns and crossings. Diverging diamond interchanges are commonly used in busy areas to manage high volumes of traffic efficiently.

What is a "diverging diamond interchange"?

diverging diamond interchange

https://tts.langeek.co/read?text=ZGl2ZXJnaW5nIGRpYW1vbmQgaW50ZXJjaGFuZ2U&hash=aa3b43c91f0f0169e981a113543923f50c09f480&lang=en&cache-only=0&driver=googletts&accent=US

A directional interchange is a type of highway interchange designed to allow vehicles to move between highways without stopping or crossing lanes of traffic. It uses ramps and overpasses to direct traffic smoothly from one highway to another, making turns and lane changes easier and faster. This design helps reduce congestion and improve safety by keeping traffic moving efficiently without interruptions. Directional interchanges are often found in busy or complex areas where multiple highways intersect.

What is a "directional interchange"?

directional interchange

https://tts.langeek.co/read?text=ZGlyZWN0aW9uYWwgaW50ZXJjaGFuZ2U&hash=08c3f4fb0c8a8ce8016fbf51454dcbc2c5d42f26&lang=en&cache-only=0&driver=googletts&accent=US

A cloverleaf interchange is a type of highway interchange where roads are connected by a series of curved ramps that resemble the shape of a cloverleaf. It allows vehicles to smoothly exit and enter highways without stopping, as the ramps provide a way for drivers to turn in all directions. This design reduces traffic delays and keeps vehicles moving, though it may take up more space than other types of interchanges. Cloverleaf interchanges are often used in areas where multiple highways meet.

What is a "cloverleaf interchange"?

cloverleaf interchange

https://tts.langeek.co/read?text=Y2xvdmVybGVhZiBpbnRlcmNoYW5nZQ&hash=9712dbc32b2ff3ef53ced643f02cf68311e0cd37&lang=en&cache-only=0&driver=googletts&accent=US

A single-point urban interchange (SPUI) is a type of road design where all lanes of traffic are directed through a single traffic signal at the point where two roads meet, usually at a busy intersection. This setup allows vehicles to move efficiently through the intersection with fewer signal phases and reduces congestion. SPUIs are often used in urban areas where there is limited space and high traffic volume, as they help improve the flow of traffic by simplifying the intersection design.

What is a "single-point urban interchange"?

single-point urban interchange

https://tts.langeek.co/read?text=c2luZ2xlLXBvaW50IHVyYmFuIGludGVyY2hhbmdl&hash=c08a9e0c6414613ec500cee562fb637a7b08cfa1&lang=en&cache-only=0&driver=googletts&accent=US

A stack interchange is a type of highway interchange where multiple roads or highways are connected by a series of ramps and overpasses stacked on top of each other. This design allows traffic to flow in different directions without crossing paths, minimizing congestion and reducing the need for traffic signals. Stack interchanges are commonly used in busy urban areas where multiple highways meet, as they efficiently manage high volumes of traffic while maintaining smooth flow and safety.

What is a "stack interchange"?

stack interchange

https://tts.langeek.co/read?text=c3RhY2sgaW50ZXJjaGFuZ2U&hash=3305117859eaae5856ff18090daa7d2f9d64d47e&lang=en&cache-only=0&driver=googletts&accent=US

A trumpet interchange is a type of highway interchange that connects a main highway to a smaller road or access road, often in the shape of a "trumpet" with one curved ramp. This design allows vehicles to enter or exit the main highway easily, without crossing traffic, by using a simple curved ramp. Trumpet interchanges are typically used in areas where a highway meets a secondary road, helping traffic flow smoothly with minimal complexity. They are common in rural or less-developed areas with lower traffic volumes.

What is a "trumpet interchange"?

trumpet interchange

https://tts.langeek.co/read?text=dHJ1bXBldCBpbnRlcmNoYW5nZQ&hash=6beec9355e318d97f78e3682f2c5a24a38a531e9&lang=en&cache-only=0&driver=googletts&accent=US

A spaghetti junction is an informal term used to describe a complex and tangled highway interchange with many overpasses, ramps, and roads that intersect in a confusing or intricate pattern. The design can look like a plate of spaghetti, with roads looping over or under each other in multiple directions. Spaghetti junctions are often found in busy urban areas where several highways or major roads converge, helping to manage high volumes of traffic but sometimes making navigation challenging for drivers unfamiliar with the area.

What is a "spaghetti junction"?

spaghetti junction

https://tts.langeek.co/read?text=c3BhZ2hldHRpIGp1bmN0aW9u&hash=69ca71f7091961d72dda6e21c8342d971e55653d&lang=en&cache-only=0&driver=googletts&accent=US

A Michigan left is a type of traffic maneuver used at intersections to improve traffic flow and reduce congestion. Instead of making a left turn directly at an intersection, drivers first turn right, then use a U-turn at a designated point further down the road to head in the opposite direction. This system eliminates the need for left-turn traffic to wait at the intersection, making it safer and more efficient. Michigan lefts are commonly used in areas with heavy traffic or where there is limited space for traditional left-turn lanes.

What is a "Michigan left"?

Michigan left

https://tts.langeek.co/read?text=TWljaGlnYW4gbGVmdA&hash=9d878c0a41664f5da6b7be03bba96aabfa4fe76a&lang=en&cache-only=0&driver=googletts&accent=US

A four-way stop is an intersection where all four directions of traffic must stop before proceeding. Each vehicle must come to a complete stop at the intersection, and drivers then take turns based on the order of arrival or right-of-way rules. Vehicles coming from different directions can move forward one at a time, which helps prevent accidents and keeps traffic moving smoothly. Four-way stops are often used in areas with moderate traffic where signals are not necessary but controlling the flow of vehicles is important.

What is a "four-way stop"?

four-way stop

https://tts.langeek.co/read?text=Zm91ci13YXkgc3RvcA&hash=f261bd862446d9ed2092ca4710b73c9fb2fb8833&lang=en&cache-only=0&driver=googletts&accent=US

Here you will learn some English words related to Highway Infrastructure and Intersections such as "divided highway", "grade crossing", and "interchange."

کلمات انگلیسی برای "زیرساخت های بزرگراه و تقاطع ها"